MIL-PRF-25134C(USAF)
4. VERIFICATION
4.1 Classification of inspection. The inspection requirements specified herein are classified as
follows:
a. Qualification inspection. (See 4.2)
b. Quality conformance inspection. (See 4.3)
4.2 Qualification inspection.
4.2.1 Qualification procedures. Upon successful completion of all testing requirements as
specified herein except the service test (see 3.17 and 4.7.14), the contractor shall provide a
certified qualification test report showing that the material conforms to all requirements of this
document. The report shall be forwarded to WR-ALC/LKJE, 460 2ND ST, STE 221, ROBINS
AFB, GA 31098-1640. Upon review and acceptance of the test report, the government will add
the product to the Qualified Products List or request that service testing be accomplished. If
service testing is required, procedures will be as specified in 4.7.14.
4.2.2 Qualification test report. The qualification test report shall include complete data, in the
contractor's format, to describe method of performance of each test and definitive results to verify
that the material conforms to all requirements of this specification except the service test. The
report shall also include complete formulation data identifying each ingredient of the remover by
chemical or proprietary name.
4.3 Quality conformance inspection. Quality conformance inspection shall include all tests of this
specification except hydrogen embrittlement (4.7.10), cold stability (4.7.12), storage stability
(4.7.13), and service tests (4.7.14).
4.4 Test conditions. Except as otherwise specified in the particular test methods, all testing shall
be conducted under standard laboratory conditions of 75° ± 2° F and 50 ± 5 percent relative
humidity.
4.5 Comparison formula. The comparison formula required by this specification shall be
prepared as follows:
INGREDIENTS
PERCENT BY WEIGHT
Paraffin Wax (Specification VV-W-95, Grade B, Finely Shaved)
3.0
Methylene Chloride (ASTM D4701)
67.0
Wetting Agent (alkyl aryl sulfonate, Santomerse I, or equal) 5.0
Methyl Cellulose (Commercial Grade, 400 Cps)
5.0
Tetrahydrofuran (Commercial Grade)
7.0
Methyl Ethyl Ketone (Technical) ASTM D740
6.0
Ammonium Hydroxide, (Technical O-A-451, Type I)
7.0
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business