An Integrated Publishing, Inc. Site

An Integrated Publishing Website

gal\) maximum] volatile organic content \(VOC\) complying paint. The paint is a special-purpose white alkyd enamel \(Formula Number 30\) for interior use, either primed steel or primed aluminum \(see 6.1\). This product may be used wherever VOC air pollution regulations apply. Product is supplied in a single can and used as supplied without thinning.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13

MIL-DTL-1115E

3.8 Off-gassing. The enamel shall be certified for and assigned a usage category of either "Permitted" or

"Limited" in accordance with NAVSEA S9510-AB-ATM-010 chapter titled "Material Control Program" (see 4.7

and 6.8).

4. VERIFICATION

4.1 Classification of inspections. The inspection requirements specified herein are classified as follows:

First article inspection (see 4.2).

Conformance inspection (see 4.3).

Lot acceptance inspection (see 4.3.2).

4.2 First article inspection. First article inspection shall be performed on a random sample drawn from the first

production batch of enamel. First article inspection shall include all tests specified in table VII and 4.5 including

those designated in table VII as a "conformance inspection test" (see 6.3).

4.3 Conformance inspection. Conformance inspection shall be provided in accordance with Method 1011,

1021 and 1031 of FED-STD-141 and shall consist of all tests designated as "conformance inspection test" in table

VII.

4.3.1 Ingredient materials. When requested by the contracting activity, 1 pint of each ingredient in the formula

specified (see table I) shall be available for test purposes.

4.3.2 Lot acceptance inspection. Lot acceptance inspection shall consist of those tests designated in table VII.

Failure of a sample to pass any test shall be cause for rejection of the lot.

4.4 Inspection conditions. Unless otherwise specified in the applicable test paragraphs of this specification, all

inspections shall be performed in accordance with the test conditions specified in table VII and 4.5.

TABLE VII. Test procedures.

FED-STD-141

ASTM test

Test

Requirement

Test

test method

method

Toxicity

3.2.4

4.6

----

Pigment content

Table III

Table VII

4021.1

D2698

Volatiles vehicle content

Table III

Table VII

----

D2369

Non-volatile vehicle content

Table III

Table VII

4053.1

----

Water content 2/

Table III

Table VII

----

D95/D1364

VOC g/L 2/

----

----

Metal and asbestos content

Table III

Hazardous air pollutants 2/

3.3.2

4.5.3

7356/7360

E1252

Phthalic anhydride 2/

Table II

4.5.6

----

Rosin/rosin derivatives 2/

Table II

Table VII

----

Phenolic resin 2/

Table II

Table VII

5141.1

----

Soya oil 2/

Table II

Table VII

----

D2245

Drying oil acids 2/

Table II

4.5.5

----

Coarse particles/skins

Table III

Table VII

4092.1

D185

Viscosity 1/

Table III

Table VII

----

D562

Weight per liter (gallon) 1/

Table III

Table VII

----

D1475