For Parts Inquiries call (727) 344-9615
A Service Disabled Veteran Owned Small Business
© Copyright 2015 Integrated Publishing, Inc.

MIL-DTL-1115 Enamel, Interior, Alkyd, White \(Formula No. 30\)This specification covers a 250 grams per liter \(g/L\) maximum [2.08 pounds per gallon \(lb/gal\) maximum] volatile organic content \(VOC\) complying paint. The paint is a special-purpose white alkyd enamel \(Formula Number 30\) for interior use, either primed steel or primed aluminum \(see 6.1\). This product may be used wherever VOC air pollution regulations apply. Product is supplied in a single can and used as supplied without thinning.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13


img
. . .
MIL-DTL-1115E
TABLE IV. Soluble metals content - Continued.
Soluble metal and its compound
Maximum, mg/L
Selenium and its compounds
1.0
Silver and its compounds
5.0
Tantalum and its compounds
100.0
Thallium and its compounds
7.0
Tungsten and its compounds
100.0
Vanadium and its compounds
24.0
Zinc and its compounds
250.0
TABLE V. Total metals content.
Metal and its compounds
Maximum, %WT
Antimony and its compounds
0.015
Arsenic and its compounds
0.005
Barium and its compounds (excluding barite)
0.10
Beryllium and its compounds
0.0002
Cadmium and its compounds
0.0005
Chromium (VI) compounds
0.001
Chromium and its chromium (III) compounds
0.56
0.005 1/
Cobalt and its compounds
Copper and its compounds
0.01
Fluoride salts
0.18
Lead and its compounds
0.005
Mercury and its compounds
0.0002
Molybdenum and its compounds
0.35
Nickel and its compounds
0.02
Selenium and its compounds
0.002
Silver and its compounds
0.001
Tantalum and its compounds
0.100
Thallium and its compounds
0.007
Tungsten and its compounds
0.100
Vanadium and its compounds
0.01
Zinc and its compounds
0.25
NOTE:
1/
Total cobalt content may exceed 0.005 %WT (up to 0.2 %WT) only if a cobalt
drier is used to effect proper drying. Regardless of whether a cobalt drier is
used, soluble cobalt content may not exceed table IV requirements.
3.3.2 Hazardous air pollutants (HAPs). The contents of HAPs solvents in the total enamel shall be not greater
than the percent by weight (%WT) values listed in table VI when tested as specified in 4.5.3.
8



For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business

© Copyright 2015 Integrated Publishing, Inc. Site Design & Marketing by Strategico.