An Integrated Publishing, Inc. Site

An Integrated Publishing Website

gal\) maximum] volatile organic content \(VOC\) complying paint. The paint is a special-purpose white alkyd enamel \(Formula Number 30\) for interior use, either primed steel or primed aluminum \(see 6.1\). This product may be used wherever VOC air pollution regulations apply. Product is supplied in a single can and used as supplied without thinning.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13

MIL-DTL-1115E

TABLE III. Formula no. 30 quantitative requirements - Continued.

Characteristics

Requirements

Minimum

Maximum

Coarse particles and skins (as residue on N.

------

0.2

325 sieve) %WT of enamel

Viscosity, Krebs units

Weight per gallon, kg/liter (pounds/gallon)

1.32 (11.0)

1.44 (12.0)

60� Specular gloss

-----

Contrast ratio

0.92

-----

Color, ĆE

-----

1.0

Time to dry to touch (hours)

-----

2.0

Time to dry through (hours)

-----

8.0

Pencil hardness

-----

Fineness of grind, Hegman units

------

Flash point, �C (�F)

38 (100)

------

Sag resistance, mm (mils)

0.11 (5)

-----

VOC, g/L (pounds/gallon)

------

250 (2.09)

Asbestos content, %WT of dry film

------

0.5

Crystalline silica content, %WT of dry film

------

0.5

3.3.1 Metal content. The content of each soluble metal and total content of each metal of the enamel shall be

less than the values listed in table IV and table V when tested as specified in 4.5.2.

TABLE IV. Soluble metals content.

Soluble metal and its compound

Maximum, mg/L

Antimony and its compounds

15.0

Arsenic and its compounds

5.0

Barium and its compounds (excluding barite)

100.0

Beryllium and its compounds

0.75

Cadmium and its compounds

1.0

Chromium (VI) compounds

1.0

Chromium and its chromium (III) compounds

560.0

Cobalt and its compounds

50.0

Copper and its compounds

25.0

Fluoride salts

180.0

Lead and its compounds

5.0

Mercury and its compounds

0.20

Molybdenum and its compounds

350.0

Nickel and its compounds

20.0