An Integrated Publishing, Inc. Site

An Integrated Publishing Website

gal\) maximum] volatile organic content \(VOC\) complying paint. The paint is a special-purpose white alkyd enamel \(Formula Number 30\) for interior use, either primed steel or primed aluminum \(see 6.1\). This product may be used wherever VOC air pollution regulations apply. Product is supplied in a single can and used as supplied without thinning.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13

MIL-DTL-1115E

4.5.2 Soluble and total metal content. Asbestos, soluble and total metal content, except tantalum and tungsten,

shall be determined on a dry film of the enamel in accordance with the 40 CFR 261.24(a) and the appropriate test

listed below. Asbestos shall be analyzed in accordance with 29 CFR 1915.1001, Appendix K and the results shall

be recorded as percent by weight of the dry enamel film. Soluble metal content shall be analyzed as milligrams per

liter (mg/L) (see tables VIII and IX.). Total metal content shall be analyzed as percent by weight of the dry enamel

film. The test results for asbestos, each individual soluble metal, and total metal shall be as specified in 3.3.1, table

III, table IV, and table V. Tantalum and tungsten soluble metal content and total metal content shall be analyzed as

specified in 4.5.2.1.

TABLE VIII. Test methods for evaluating solid waste physical/chemical methods, EPA-SW-846.

Metal/material

Digestion test method

All metals, except Chromium (VI)

3050

Chromium (VI)

3060

Metal/material

SW-846 analysis test method

Antimony

7040 or 7041

Arsenic

7060 or 7061

Barium

7080 or 7081

Cadmium

7131

Total chromium

7190

Chromium (VI)

7195, 7196, or 7197

Lead

7421

Mercury

7470 or 7471

Nickel

7520 or 7521

Selenium

7740 or 7741

Silver

7760 or 7761

TABLE IX. Methods for chemical analysis of water and waste,

EPA-600/4-79-020.

Metal/material

Test method

Beryllium

210.1 or 210.2

Cobalt

219.1 or 219.2

Copper

220.1 or 220.2

Fluoride

340.1, 340.2, or 340.3

Molybdenum

246.1 or 246.2

Thallium

279.1 or 279.2

Vanadium

286.1 or 286.2

Zinc

289.1 or 289.2

4.5.2.1 Tantalum and tungsten content. Determine the tantalum and tungsten content of the enamel using any

appropriate spectroscopy test method. Conduct the tests in accordance with the equipment manufacturer's directions

for the use of the instrument. Paint manufacturer is responsible for justifying the test method choice and analytical

accuracy. Test results for tantalum and tungsten shall be as specified in table IV and table V.